Showing 1–16 of 27 results

Sale!

LDN4 40/10 MVOLT EZ10 EL HSG U

$134.00 $75.00

LDN4 4″ round

40/ 4000K

10 1000 lumens

MVOLT Multi-volt

EZ10 0-10V eldoLED driver with
smooth and flicker-free
deep dimming performancedown to 10%

EL Emergency battery pack with integral test switch. 10W Constant
Power, Not Certified in CA Title 20 MAEDBS

LD Matte diffuse

Sale!

4 in. Downlight – LED – 12 Watts – 4000K – 1000 Lumens – Includes LED and Housing – Wet Location – Lithonia LDN4 40/10 MVOLT EZ10 HSG U

$136.00 $75.00

LDN 4″ of downlights are the most cost-effective general illumination solution for commercial-grade downlight applications. The LDN4 design allows for a quiet, glare-free ceiling without compromising on efficacy.

  • Galvanized steel mounting/plaster frame
  • Reflectors are retained by torsion springs
  • LED light source concealed with diffusing optical lens
  • Light engine and drivers are accessible from above or below ceiling.
  • LED light source concealed with diffusing optical lens
Sale!

CREE CR14-40L-35K-S 40W 40 Watt 1×4 Architectural LED Troffer Light Fixture 4000 Lumen Step Dimming 3500K

$289.00 $150.00

ShineRetrofits Input:
This 40 watt CR14 1×4 Architectural LED troffer provides high-quality light with a 90 CRI color quality and 4000 lumens in a color temperature of 3500K.   The CR14 troffer allows for easy application for either commercial new construction or renovated spaces and includes a 10 year warranty with 75,000 lifetime hours. This troffer also provides step level dimming to 50%.

Sale!

6 in. Downlight – LED – 22 Watts – 3000K – 2000 Lumens – Includes LED and Housing – Wet Location – LDN6 30/20 MVOLT EZ10 WL HSG

$100.00 $75.00

LDN 6″ downlights are the most cost-effective general illumination solutions for commercial-grade downlight applications. The LDN6 design allows for a quiet, glare-free ceiling without compromising on efficacy.

  • With 55° cutoff and 75 – 80 typical LPW, LDN6 allows for a quiet, glare-free ceiling without compromising on efficacy
  • eldoLED dimming drivers available in 10% or 1% minimum dimming levels
  • Galvanized steel mounting/plaster frame; galvanized steel junction box with bottom-hinged access covers and spring latches
Sale!

6″ 2-Lamp 26DTT MVOLT Non-IC Frame-In. (LF6N 2/26DTT MVOLT BDP)

$72.00 $61.59

6″ 2-Lamp 26DTT MVOLT Non-IC Frame-In, For use with F6O2, F6B3, F6W1 and F6L Reflectors. (LF6N 2/26DTT MVOLT BDP)

INTENDED USE — Ideal for a wide variety of low- to medium-height ceiling applications including
commercial, retail and hospitality spaces where an open or damp location lensed fixture is required.
CONSTRUCTION — Heavy gauge die formed galvanized steel mounting frame with mechanical
trim retention (yoke) ensures secure and flush reflector mounting to ceiling. Attached to frame are
vertically adjustable mounting brackets for use with C channels, ½” steel conduit or 16 gauge flat bar
hangers included, standard. Frames equipped with galvanized junction box UL Listed for through wire
applications. Junction boxes equipped with (2) ¾” and (4) ½” conduit knockouts with pryout slots and
removable access doors.
Maximum 1-1/2” ceiling thickness.
OPTICS — Aluminum full reflectors are optically designed to maximize lumen output and to provide
superior glare control. Anodized finishes for open reflectors are semi-specular or diffuse in a variety of
colors. Polyester powder coat finishes also are available in white.
Lenses are available in clear flat glass, tempered prismatic glass, or polycarbonate to provide optimal
visual comfort and improved aesthetics. Lens is recessed 1-1/2 (3.8) from flange.
ELECTRICAL — Electronic ballast with end of lamp life protection standard. Class P thermally protected
ballast protects against improper contact with insulation. Minimum starting temperature is 0°F/-18°C.
Rated for #12 AWG conductor thru-branch wiring. Minimum 90° supply wire.
Ground wire provided.
Lamp Socket Base:
DTT 4-pin lamps – 13W (G24Q-1); 18W (G24Q-2); 26W (G24Q-3)

Sale!

4″ Open down light (ICO 35/35 6 40 120 HSG U)

$200.00 $125.00

Acuity Lithonia Gotham Incito ICO 6″ Downlight

Gotham ICO 35-35 6-40-120-HSG-U Downlight
Rated up to 277 Volts
Dimmable
Est power use 62 watts ( that is for 5,000 lumens)

 
INTENDED USE • Achieve the lowest installed power density and operating costs while achieving every layer of light via the optimized general illumination distributions from the EVO family, and the high centerbeam accent layers from the highly flexible Incito family. The EVO and Incito families maintain consistent luminous apertures, dimming characteristics, and color quality to ensure the blending of families in common spaces renders an unparalleled, tailored visual experience. 
 
OPTICAL SYSTEM • Ten optimized distribution patterns allow designers to achieve tailored effects. • Self-flanged semi-specular or matte-diffuse lower reflector utilized in combination with a highly transmissive lens. • Patented Bounding Ray™ Optical Principle design (U.S. Patent No. 5,800,050) provides smooth and continuous transition from lensed source to the top of the reflector down to the bottom of the reflector. 
MECHANICAL SYSTEM • Light engine and driver are accessible from above or below ceiling. • 16-gauge black painted steel mounting frame with C-channel mounting bars included. Post-installation adjustment possible from above or below ceiling. • Galvanized steel junction box with hinged access covers and spring latch. Three combination 1/2″-3/4″ and one 1/2″ knockout for straight-through conduit runs. Capacity: 8 (4in, 4out) No. 12 AWG conductors rated for 90°C. • Accommodates up to 1½”-thick ceilings. 
 
ELECTRICAL SYSTEM • Solid-state LED light engine available in 2700 K, 3000 K, 3500 K or 4000 K color temperatures. CRI: 85 typical. • eldoLED ecoDrive 0-10V driver available with 10% dimming level. • eldoLED ecoDrive 0-10V driver available with 1% dimming level. • eldoLED SOLOdrive 0-10V driver available with <1% dimming level. • eldoLED SOLOdrive DALI driver available with <1% dimming level. • eldoLED POWERdrive DMX with RDM (remote device management) available with <1% dimming level. • Rated system life of 60,000 hours at >70% output. • Emergency battery pack with remote test switch available. • Tested in accordance with LM-79 and LM-80 standards. LISTINGS • Fixtures are CSA certified to meet US and Canadian standards; wet location, covered ceiling
Sale!

LED 2″ Round Adjustable (missing clips) (ICO ADJ 2 27/07 35D MVOLT UG2 HSG U)

$72.00 $50.00

For applications requiring a maximum of flexibility, Incito™ adjustable luminaires can tilt continuously to any angle between 0-40º. With lumen packages up to 6500 delivered lumens, multiple beam angles, and four color temperature options, this is a solid-state luminaire capable of generating an outstanding quantity of highly-configurable, precisely-controlled light.

(MISSING CLIPS)

Sale!

3″ Down Light, No TRIM BRACKET (EVO R 30/10 4 WD MVOLT E21 HSG)

$120.00 $100.00

OPTICAL SYSTEM

  • Patented Bounding Ray™ optical design (U.S. Patent No. 5,800,050)
  • 45° cutoff to source and source image
  • Top-down flash characteristic
  • Polycarbonate lens integral to light engine

MECHANICAL SYSTEM

  • 16-gauge galvanized steel construction; maximum 1-1/2″ ceiling thickness
  • Telescopic mounting bars maximum of 32″, preinstalled, 4″ vertical adjustment
  • Toolless adjustments post installation
  • Junction box capacity: 8 (4 in, 4 out ) 12AWG rated for 90°C
  • Light engine and driver accessible through aperture

ELECTRICAL SYSTEM

  • Fully serviceable and upgradeable lensed LED light engine
  • 70% lumen maintenance at 60,000 hours
  • Tested according to LM-79 and LM-80 standards
  • Overload and short circuit protected
  • 5 SDCM; 85 CRI typical, 90+ CRI optional

(NO TRIM BRACKET)

Sale!

3″ Down light, NO TRIM BRACKET (EVO R 30/20 4WD MVOLT EZ1 HSG)

$120.00 $100.00

OPTICAL SYSTEM

  • Patented Bounding Ray™ optical design (U.S. Patent No. 5,800,050)
  • 45° cutoff to source and source image
  • Top-down flash characteristic
  • Polycarbonate lens integral to light engine

MECHANICAL SYSTEM

  • 16-gauge galvanized steel construction; maximum 1-1/2″ ceiling thickness
  • Telescopic mounting bars maximum of 32″, preinstalled, 4″ vertical adjustment
  • Toolless adjustments post installation
  • Junction box capacity: 8 (4 in, 4 out ) 12AWG rated for 90°C
  • Light engine and driver accessible through aperture

ELECTRICAL SYSTEM

  • Fully serviceable and upgradeable lensed LED light engine
  • 70% lumen maintenance at 60,000 hours
  • Tested according to LM-79 and LM-80 standards
  • Overload and short circuit protected
  • 5 SDCM; 85 CRI typical, 90+ CRI optional