Showing 1–16 of 26 results

Sale!

Gentex Evac Signal Selectable Ceiling Strobe Alarm Gcs24cw, White

$55.00 $25.00

NEW Gentex Commander 4 brand 24v evacuation signal and field selectable ceiling mount strobe. Model # GCS24CW, Part # 904-1215-002

The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. The GCS/GCC offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela. The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The GC Series has a very minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander4 Series comes standard with the 4″ mounting plate which incorporates the popular Super-Slide feature that allows the installer to easily test for supervision.

Sale!

System Sensor P2RL Horn Strobe 2W red wall

$50.00 $25.00
• Updated Modern Aesthetics
• Small profile devices for Horns and Horn Strobes
• Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• Automatic selection of 12- or 24-volt operation at 15 and 30 candela
• Field-selectable candela settings on wall units: 15, 30, 75, 95, 110, 135, and 185
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone and two volume selections
• Mounting plate for all standard and all compact wall units
• Mounting plate shorting spring checks wiring continuity before device installation
• Electrically Compatible with legacy SpectrAlert and SpectAlert Advance devices
• Compatible with MDL3 sync module
• Listed for wall mounting only
Sale!

Remote Test Station, Sngl Gang Box, 105 mA

$20.00 $15.00

DESCRIPTION

Remote Test Station, -, Finish White, Single Gang Box Mounting, Alarm Current 105 mA, Peak Output (dBA) -, Flash (Candela) -, Standby Current (uA) -, Depth (In.) 1-3/4, Height (In.) 4-3/4, Length (In.) -, Width (In.) 2-3/4, Duct Opening -, Duct Width (Ft.) -, Ambient Temp. Limits (F) 14 to 140, Coverage (Square-Ft.) -, Alarm Aux. Contact @ 250V -, Alarm Aux. Contact @ 30VDC -, Alarm State (mA) -, Humidity Range ( Percent RH) 0 to 95, Number Required 1, Standby State (mA) -, Voltage 2.8 to 32VDC
Sale!

AMM-2RIF Addressable Dual Input / Dual Output Module

$100.00 $75.00

AMM-2RIF Addressable Dual Input / Dual Output Module Features and Benefits

 

Provides two (2) relay outputs and two(2) monitor inputs in one space-saving module

Offers visual rotary, decimal switch addressing(01-159)

Contains the following:

Two (2) sets of Class B initiating device circuits

Two (2) sets of Form C relay contacts

Uses bicolor LEDs for each input and output flash, when addressed, and lights steady when in alarm

Includes a Dip switch to manually disable one (1)input and one (1) output

Ideal for fan, smoke control, and door entry installations

Sale!

FCI AOM-2RF RELAY CONTROL MODULE

$90.00 $35.00

Product Description

The FCI AOM-2RF Addressable Output Relay Control Module installs in the signaling line circuit of any Gamewell-FCI analog addressable fire control panel.
Please note: All parts should be installed and tested by a certified fire alarm company.
Sale!

NOTIFIER FDM-1 DUAL MONITOR MODULE

$100.00 $85.00

Product Description

The FDM-1 is a standard-sized dual monitor module that monitors and supervises two independent two-wire Style B (Class B) dry-contact initiating device circuits (IDCs) at two separate, consecutive addresses in intelligent, two-wire systems.
Please note: All parts should be installed and tested by a certified fire alarm company.